HideShow Navigation
3CFWPSL

Coldform2™ Oil only Single Lamination Pads

Key Facts Light 31 US Gallons | 117 Liters of oil* Cellulose
Description
Application
Facts and figures
Notes

A light weight absorbent pad with 200 pads in a bale, which is twice the number when compared to the heavy weight alternative.

This Oil only Coldform2TM pad is unique in the fact that one side is no-lint and very durable, and the other side is soft and absorbent. It combines some of the best features found in a laminated pad (non-linting & durability) while reducing the slip problem associated with double sided laminated sorbents. This pad is more absorbent than its meltblown counterpart. These features make this pad a great Coldform2TM go-to Oil only product.

Each pad is 16" x 18" (40 cm x 46 cm) and features perforations 8” in-line. The pads are supplied in a clear plastic bag.

Key Features

  • Best option for absorbing oil-based liquids
  • The sorbent is made up of two layers that are sonically welded together
  • Made from 80% recycled/sustainable cellulose
  • Top layer is made of a white, no-lint, durable spun-bond polypropylene
  • Core/base layer is made from high loft Coldform2TM sustainable fibers
  • Base layer is low-slip making this a great product for foot traffic
  • Pads are perforated down their center for more economical use

Because the top sheet is very durable and the bottom layer is low-slip, this product makes a very good sorbent choice if foot traffic is expected, or when durability is needed. This Oil only product can be used indoors or outdoors but it is not recommended for use where large amounts of water are present.

Product Code

3CFWPSL

Format

Pads, Oil only

Basis Weight

Light

Size

16” x 18” (40 cm x 46 cm)

Recycled Content*

80* %

Absorbency**

31 US Gallons | 117 Liters of oil**

Units/Case

200

LTL/Pallet

-

FTL/Pallet

42

Base Fiber

Cellulose

Star Rating

  • Avoid high-heat and Chemical applications
  • Fire retardant as per ASTM 726
  • Ensure that disposal of these sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

16” x 18” (40 cm x 46 cm)

Weight

This is the sorbent's weight with X= extra heavy, 1= heavy, 2= medium and 3= light

3

Sorbent type

Recovering just oil only fluids

Recycled Content

This product is made from 80% renewable and recycled fibers

Recycled Content