HideShow Navigation
3CFWRSL

Coldform2™ Oil only Single Lamination Roll

Key Facts Light 53 US Gallons | 200 Liters of oil* Cellulose
Description
Application
Facts and figures
Notes

This light weight absorbent roll at 300’ long is twice the length when compared to the heavy weight 150’ long product.

This Oil only Coldform2TM roll is unique in the fact that one side is no-lint and very durable, and the other side is soft and absorbent. It combines some of the best features found in a laminated roll (non-linting & durability) while reducing the slip problem associated with double sided laminated sorbents. This roll is more absorbent than its meltblown counterpart. These features make it a great Coldform2TM go-to Oil only product.

The roll is 28” x 300” (71 cm x 91 m) with perforations 7” in-line and 20” across. The roll is supplied in a clear plastic bag.

Key Features

  • Best option for absorbing oil-based liquids
  • The sorbent is made up of two layers that are sonically welded together
  • Made from 80% recycled/sustainable cellulose
  • Top layer is made of a white, no-lint, durable spun-bond polypropylene
  • Core/base layer is made from high-loft Coldform2TM sustainable fibers
  • Base layer is low-slip making this a great product for foot traffic
  • Perforated for more economical use

Because the top sheet is very durable and the bottom layer is low-slip, this product makes a very good sorbent choice if foot traffic is expected, or when durability is needed. This Oil only product can be used indoors or outdoors but it is not recommended for use where large amounts of water are present.

Product Code

3CFWRSL

Format

Roll, Oil only

Basis Weight

Light

Size

28” x 300' (71 cm x 91 m)

Recycled Content*

80* %

Absorbency**

53 US Gallons | 200 Liters of oil**

Units/Case

1

LTL/Pallet

18

FTL/Pallet

18

Base Fiber

Cellulose

Star Rating

  • Avoid high-heat and Chemical applications
  • Fire retardant as per ASTM726
  • Ensure that disposal of sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

28” x 300' (71 cm x 91 m)

Weight

This is the sorbent's weight with X= extra heavy, 1= heavy, 2= medium and 3= light

3

Sorbent type

Recovering just oil only fluids

Recycled Content

This product is made from 80% renewable and recycled fibers

Recycled Content