HideShow Navigation
2CFWRSL-S

Coldform2™ Oil only Single Lamination Split Roll

Key Facts Medium 37 US Gallons | 140 Liters of oil* Cellulose
Description
Application
Facts and figures
Notes

This split roll is a medium weight and offers a more economical alternative to the heavy weight product.

Oil only Coldform2TM is unique in the fact that one side is no-lint and very durable, and the other side is soft and absorbent. It combines some of the best features found in a laminated absorbent (non-linting & durability) while reducing the slip problem associated with double sided laminated sorbents. This split roll is more absorbent than its meltblown counterpart. These features make this a great Coldform2TM go-to Oil only product.

There are 2 split rolls in a case and both are 14” x 150' (35 cm x 46 m) with perforations 7” in-line and 20” across. The rolls are supplied in a clear plastic bag.

Key Features

  • Best option for absorbing oil-based liquids
  • The sorbent is made up of two layers that are sonically welded together
  • Made from 80% recycled/sustainable cellulose
  • Top layer is made of a white, no-lint, durable spun-bond polypropylene
  • Core/base layer is made from high loft Coldform2TM sustainable fibers
  • Base layer is low-slip making this a great product for foot traffic
  • Perforated for improved economy

Because the top sheet is very durable and the bottom layer is low-slip, this product makes a very good sorbent choice if foot traffic is expected, or when durability is needed. This Oil only product can be used indoors or outdoors but it is not recommended for use where large amounts of water are present.

Product Code

2CFWRSL-S

Format

Split Roll, Oil only

Basis Weight

Medium

Size

14” x 150' (35 cm x 46 m)

Recycled Content*

80* %

Absorbency**

37 US Gallons | 140 Liters of oil**

Units/Case

2

LTL/Pallet

18

FTL/Pallet

27

Base Fiber

Cellulose

Star Rating

  • Avoid high-heat and Chemical applications
  • Fire retardant as per ASTM726
  • Ensure that disposal of sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

14” x 150' (35 cm x 46 m)

Weight

This is the sorbent's weight with X= extra heavy, 1= heavy, 2= medium and 3= light

2

Sorbent type

Recovering just oil only fluids

Recycled Content

This product is made from 80% renewable and recycled fibers

Recycled Content