HideShow Navigation
2CFGRSL-S

Coldform2™ Universal Single Lamination Split Roll

Key Facts Medium 35 US Gallons | 132 Liters of oil** 26 US Gallons | 98 Liters of water* Cellulose
Description
Application
Facts and figures
Notes

This split roll is a medium weight and offers a more economical alternative to the heavy weight product.

This is the sustainable option to Universal polypropylene and is made from 80% renewable/recycled materials. The roll out perform meltblown single lamination, sonic bonded and AirmatrixTM when absorbing aqueous based liquids and at a lower price point too. The single sided laminate combines the best features found in a laminated roll, (no lint & durability) while reducing the slip problem associated with double sided laminated sorbents. These features make this roll a fantastic sustainable Universal product.

There are 2 split rolls in a case and both are 14” x 150' (35 cm x 46 m) with perforations 7” in-line and 20” across. The rolls are supplied in a clear plastic bag.

Key Features

  • Best value roll for absorbing aqueous, based fluids
  • Best absorbent for absorbing antifreeze
  • Made from 80% recycled/sustainable materials
  • Top layer is made of a gray, no lint, durable spun-bond polypropylene
  • Core/base layer is made from a combination of high loft cellulose fibers
  • Base layer is low slip
  • Low linting
  • Perforated for more economical use

With the top sheet being very durable and the bottom layer, low-slip, this product makes a very good sorbent choice if foot traffic is expected, or when durability is needed. Exceptional at absorbing antifreeze which is problematic for polypropylene sorbents.

Product Code

2CFGRSL-S

Format

Split Roll, Universal

Basis Weight

Medium

Size

14” x 150' (35 cm x 46 m)

Recycled Content*

80* %

Absorbency**

35 US Gallons | 132 Liters of oil** 26 US Gallons | 98 Liters of water**

Units/Case

2

LTL/Pallet

18

FTL/Pallet

27

Base Fiber

Cellulose

Star Rating

  • Avoid high-heat and Chemical applications
  • Fire retardant as per ASTM 726
  • Ensure that disposal of these sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

14” x 150' (35 cm x 46 m)

Weight

This is the sorbent's weight with X= extra heavy, 1= heavy, 2= medium and 3= light

2

Sorbent type

Recovers both oil and water based fluids at the same time

Recycled Content

This product is made from 80% renewable and recycled fibers

Recycled Content