Pads and Rolls
Spill Kits
Please enter Your NamePlease enter a valid Email Address
xThis light weight absorbent has 200 pads in a bale, which is twice the number when compared to the heavier weight 100 pad count version. As a results these pads offer a lower cost per square foot product.
The pads are made from a single layer of meltblown. The lack of sonic welds makes this pad not as strong and more prone to short, fine fibers separating from the surface although the lack of sonic welds usually makes it more absorbent when compared to the bonded alternative pad.
Each pad is 15" x 18" (38 cm x 46 cm) but is NOT perforated. The pads are supplied in a clear plastic bag.
An economical choice for everyday Oil only situations. An excellent go-to product for lighter duty indoor tasks. Oil only absorbents are suitable for recovering oil-based fluids indoors or outside.
Product Code
3MBWP
Format
Pads, Oil only
Size
15” x 18” (38 cm x 46 cm)
Recycled Content*
0* %
Absorbency**
29 US Gallons | 110 Liters of oil**
Units/Case
200
LTL/Pallet
-
FTL/Pallet
36
Base Fiber
Polypropylene
Star Rating
29 CFR 1910.120(j)(1)(vii)
...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.
29 CFR 1910.120(j)(1)(vii)
U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.
29 CFR 1910.22(a)(2)
The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.
40 CFR 263.31
Transporters “must clean up any hazardous waste discharge that occurs during transportation.
33CFR 154.1047(c)(2)
Pertaining to navigable waters, a facility that handles, stores or transports Group V petroleum oils must identify response resources such as containment booms, sorbent booms and other methods.
15” x 18” (38 cm x 46 cm)
Recovering just oil only fluids
Enter your details here to sign up for our newsletter