HideShow Navigation
2MBWR

Meltblown, Oil only Non Bonded Roll

Key Facts 34 US Gallons | 127 Liters of oil* Polypropylene
Description
Application
Facts and figures
Notes

This absorbent is a medium weight roll and is a more economical alternative to the heavy weight option.

The roll is made from a single layer of meltblown. The lack of sonic welds makes this fabric not as strong and more prone to short, fine fibers separating from the surface although the lack of sonic welds usually makes it more absorbent when compared to the bonded alternative roll.

The roll is 30" x 150' (76 cm x 46 m) but is NOT perforated. The roll is supplied in a clear plastic bag.

 

Key Features

  • The roll is made from a single layer of very fine meltblown fibers
  • Good value and reliable performance
  • Made from high quality polypropylene

An economical choice for everyday Oil only situations. An excellent go-to product for lighter duty indoor tasks. Oil only absorbents are suitable for recovering oil-based fluids indoors or outside.

Product Code

2MBWR

Format

Roll, Oil only

Size

30” x 150' (76 cm x 46 m)

Recycled Content*

0* %

Absorbency**

34 US Gallons | 127 Liters of oil**

Units/Case

1

LTL/Pallet

18

FTL/Pallet

27

Base Fiber

Polypropylene

Star Rating

  • Fire retardant as per ASTM 726
  • Ensure that disposal of these sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.

40 CFR 263.31

Transporters “must clean up any hazardous waste discharge that occurs during transportation.

33CFR 154.1047(c)(2)

Pertaining to navigable waters, a facility that handles, stores or transports Group V petroleum oils must identify response resources such as containment booms, sorbent booms and other methods.



Size

30” x 150' (76 cm x 46 m)

Sorbent type

Recovering just oil only fluids

Recommended

Recommended for recovering oil only fluids on large bodies of sea or fresh water