HideShow Navigation
3MBYPB1620

Meltblown Chemical Sonic Bonded Pads

Key Facts Light 29 US Gallons | 109 Liters of oil, 20 US Gallons | 75 Liters of water* Polypropylene
Description
Application
Facts and figures
Notes

There are 200 light weight pads in a bale, which is twice the number when compared to the heavier weight 100 pad version. As a results these pads offer a lower cost per square foot product.

The pads are made from a single layer of meltblown which is sonically bonded together. The sonic bonding points makes the pad less prone to stray fibers becoming detached and also gives the pad a very even structure which contributes to the good absorbency rate. The yellow color identifies these pads as suitable for emergency use.

Each pad is 16" x 20" (40 cm x 50 cm) and features a perforation across the center. The pads are supplied in a clear plastic bag.

Key Features

  • Yellow color code signals emergency use
  • Great value, versatility and reliable performance
  • Very fast wicking, which reduces the clean-up time
  • Dimpled surface reduces lint, increases strength and speeds absorption
  • Combines high loft and flexibility

The go-to sorbent for emergency spill response. A great choice to safely clean up a wide range of toxic, flammable, corrosive and aggressive chemical liquids. Use them anytime there is a spill of an unknown liquid.

Product Code

3MBYPB1620

Format

Pads, Chemical

Basis Weight

Light

Size

16” x 20” (40 cm x 50 cm)

Recycled Content*

0* %

Absorbency**

29 US Gallons | 109 Liters of oil, 20 US Gallons | 75 Liters of water**

Units/Case

100

LTL/Pallet

-

FTL/Pallet

36

Base Fiber

Polypropylene

Star Rating

  • Fire retardant as per ASTM 726
  • Ensure that disposal of these sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

16” x 20” (40 cm x 50 cm)

Weight

This is the sorbent's weight with X= extra heavy, 1= heavy, 2= medium and 3= light

3

Sorbent type

For recovering unknown, aggressive or hazardous fluids