HideShow Navigation
1MBYRB

Meltblown Chemical Sonic Bonded Roll

Key Facts Heavy 44 US Gallons | 166 Liters of oil, 33 US Gallons | 125 Liters of water* Polypropylene
Description
Application
Facts and figures
Notes

A heavy weight absorbent roll at 150' long is half the length when compared to the light weight 300' long version, but offers a heavier per square foot product.

The roll is made from a single layer of meltblown which is sonically bonded together. The sonic bonding points makes the roll less prone to stray fibers becoming detached and also gives a very even structure which contributes to the good absorbency rate. These attributes help make the roll an industry standard construction, as it offers all-round average performance but excellent versatility. The yellow color identifies these rolls as suitable for emergency use.

The roll is 30" x 150' (76 cm x 38 m) with perforations 7.5” in-line and 20” across.
The roll is supplied in a clear plastic bag.

Key Features

  • Yellow color code signals emergency use
  • Great value, versatility and reliable performance
  • Very fast wicking, which reduces the clean-up time
  • Dimpled surface reduces lint, increases strength and speeds absorption
  • Combines high loft and flexibility

The go-to sorbent for emergency spill response. A great choice to safely clean up a wide range of toxic, flammable, corrosive and aggressive chemical liquids. Use them anytime there is a spill of an unknown liquid.

Product Code

1MBYRB

Format

Roll, Chemical

Basis Weight

Heavy

Size

30” x 150’ (76 cm x 46 m)

Recycled Content*

0* %

Absorbency**

44 US Gallons | 166 Liters of oil, 33 US Gallons | 125 Liters of water**

Units/Case

1

LTL/Pallet

18

FTL/Pallet

27

Base Fiber

Polypropylene

Star Rating

  • Fire retardant as per ASTM 726
  • Ensure that disposal of these sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

30” x 150’ (76 cm x 46 m)

Sorbent type

For recovering unknown, aggressive or hazardous fluids

Recommended

We recommend this absorbent for recovering unknown or hazardous spills