HideShow Navigation
1MBWPB1620

Meltblown Oil only Sonic Bonded Pads

Key Facts Heavy 23 US Gallons | 85 Liters of oil* Polypropylene
Description
Application
Facts and figures
Notes

These are a heavy weight absorbent with 100 pads in the bale. This is half the number when compared to the 200 pad light weight version so as a result offers a heavier per square foot product.

The pads are made from a single layer of meltblown which is sonically bonded together. The sonic bonding points makes the pad less prone to stray fibers becoming detached and also gives the pad a very even structure which contributes to the good absorbency rate. These attributes help make the pad an industry standard construction, as it offers all-round average performance but excellent versatility.

Each pad is 16" x 20" (40 cm x 50 cm) and features a perforation across the center. The pads are supplied in a clear plastic bag.

Key Features

  • The pad is made from a single layer of meltblown that is sonically bonded together
  • Good value and reliable performance
  • Made from high quality polypropylene
  • Perforated for more economical use

An economical choice for everyday Oil only situations. Excellent go-to product for lighter duty indoor tasks. Because the pad is Oil only, use mostly but not exclusively outdoors.

Product Code

1MBWPB1620

Format

Pads, Oil only

Basis Weight

Heavy

Size

16” x 20” (40 cm x 50 cm)

Recycled Content*

0* %

Absorbency**

23 US Gallons | 85 Liters of oil**

Units/Case

100

LTL/Pallet

-

FTL/Pallet

36

Base Fiber

Polypropylene

Star Rating

  • Fire retardant as per ASTM 726
  • Ensure that disposal of these sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

16” x 20” (40 cm x 50 cm)

Sorbent type

Recovering just oil only fluids