HideShow Navigation
3MBWRB

Meltblown Oil only Sonic Bonded Roll

Key Facts Light 59 US Gallons | 223 Liters of oil* Polypropylene
Download the
3MBWRB Data Sheet here Download the
SDS Sheet here
Description
Application
Facts and figures
Notes

This light weight absorbent roll at 300' long is twice the length when compared to the heavy weight 150' long version, and as a results offers the lowest cost per square foot product.

The roll is made from a single layer of meltblown which is sonically bonded together. The sonic bonding points makes the roll less prone to stray fibers becoming detached and also gives the pad a very even structure which contributes to the good absorbency rate. These attributes help make the roll an industry standard construction, as it offers all-round average performance but excellent versatility.

The roll is 30" x 300' (76 cm x 92 m) and features repeated perforations 7.5” in-line
and 20" across. The roll is supplied in a clear plastic bag.

Key Features

  • The roll is made from a single layer of meltblown that is sonically bonded together
  • Good value and reliable performance
  • Made from high quality polypropylene
  • Perforated for more economical use

An economical choice for everyday Oil only situations. Excellent go-to product for lighter duty indoor tasks. Oil only can be used effectively to recover oil-based spills indoors or out.

Product Code

3MBWRB

Format

Roll, Oil only

Basis Weight

Light

Size

30” x 300' (76 cm x 92 m)

Recycled Content*

0* %

Absorbency**

59 US Gallons | 223 Liters of oil**

Units/Case

1

LTL/Pallet

18

FTL/Pallet

27

Base Fiber

Polypropylene

Star Rating

  • Fire retardant as per ASTM 726
  • Ensure that disposal of these sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

30” x 300' (76 cm x 92 m)

Weight

This is the sorbent's weight with X= extra heavy, 1= heavy, 2= medium and 3= light

3

Sorbent type

Recovering just oil only fluids