HideShow Navigation
XUCGPL-PLY

Ultraclean™ Universal Single Lamination Poly-backed Pads

Key Facts Extra Heavy 31 US Gallons | 117 Liters of oil, 39 US Gallons | 147 Liters of water* Polyester
Description
Application
Facts and figures
Notes

These are an extra heavy weight pad with 100 pads in the bale.

Ultraclean™ is an innovative Universal product line that outperforms virtually all traditional meltblown sorbents. Constructed from a blend of recycled synthetic fibers and featuring a highly absorbent core between a gray spun-bond top sheet and a blue low-slip poly-backing. Ultraclean™ combines superior strength with lint-free, balanced performance (absorbing oil and water equally) and good chemical resistance. It also contains SpillLock™, which soaks up 150 times its weight and turns absorbed water-based spills into a leak-resistant gel.

Each pad is 16" x 18" (40 cm x 46 cm). The pads are supplied in a clear plastic bag.

Key Features

  • Medical-quality low-slip poly backing keeps absorbed liquids from penetrating to floors or surfaces below
  • Superior strength means it can stay on the job longer
  • Contains SpillLock™ to boost absorbency and reduce leaks
  • Contains 80%* recycled fibers
  • These pads are not perforated

These pads are used extensively in the food manufacturing industries where cleanliness is the top priority. High-end manufacturers can use this absorbent to keep their floors dry and clean under any leaks or drips.

Ultraclean™ contains SpillLock™ technology

Product Code

XUCGPL-PLY

Format

Pads, Universal

Basis Weight

Extra Heavy

Size

16” x 18” (40 cm x 46 cm)

Recycled Content*

80* %

Absorbency**

31 US Gallons | 117 Liters of oil, 39 US Gallons | 147 Liters of water**

Units/Case

100

LTL/Pallet

-

FTL/Pallet

30

Base Fiber

Polyester

Star Rating

  • Avoid high-heat applications
  • Fire retardant as per ASTM 726
  • Ensure that disposal of these sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.



Size

16” x 18” (40 cm x 46 cm)

Weight

This is the sorbent's weight with X= extra heavy, 1= heavy, 2= medium and 3= light

X

Sorbent type

Recovers both oil and water based fluids at the same time

Recommended

Recommended for recovering both oil and water indoors

Recycled Content

This product is made from 80% recycled synthetic fibers

Recycled Content

Features Spill Lock™

SpillLock™ turns aqueous spills into a gel which is locked into the absorbent and improves the absorbency by up to 150 times

Features Spill Lock™