HideShow Navigation
SK-H95W

Wheeled Overpack Chemical Spill Kit

Key Facts 100 US Gallons | 378 Liters of oil** 100 US Gallons | 378 Liters of water* Polypropylene and SAF
Description
Application
Facts and figures
Notes

95 US Gallon (359 Liter) wheeled bin

This is a U.S. Department of Transportation-approved 95-gallon container that can also double up as an overpack for the used absorbents. The container features a screw-on lid with a moulded handle in tough plastic, making this kit very robust. The wheels make this kit maneuverable over rough terrain. This container is exclusive to ESP US.

Contents:


150 x Pads

size 15” x 18” (38 cm x 46 cm)

The pads in this spill kit are sonic bonded meltblown polypropylene Chemical. They feature excellent wicking properties and sonic bond points that prevent stray fibers from becoming detached.


21 x Socks

size 3” x 4’ (8 cm x 1.2 m)

These socks feature a spun-bond outer sleeve with a durable stitched seam. The core is a next generation absorbent that will recover aggressive and unknown spills. Durable plastic clips seal the sock at both ends.


8 x Pillows

size 9" x 14" (23 cm x 38 cm)

These pillows feature a spun-bond outer surface with a super absorbent flake core. This next generation absorbent will absorb and hold large quantities of aggressive, hazardous or unknown fluids.


10 x Waste Bag

These are made from a tough grade of polythene. There is also a cable tie supplied so that the waste can be secured safely.


1 pair of gloves

Waterproof gloves help to ensure safe handling of spilled substance.


1 pair of goggles

All-in one clear goggles provide eye protection from splashes.


1 guide book

An informative booklet that advises on spill recovery.

This spill kits feature a combination of pads and socks that will contain and recover a 100 Gallon spill of hazardous oil-based and water-based fluid plus the essential equipment needed to handle the clean up process. Please note extra caution should be taken when dealing with hazardous or unknown spill types.

Product Code

SK-H95W

Format

Chemical, Spill Kit

Absorbency*

100 US Gallons | 378 Liters of oil** 100 US Gallons | 378 Liters of water*

Units/Case

1/Case

LTL/Pallet

4

FTL/Pallet

4

Base Fiber

Polypropylene and SAF

Star Rating

  • Refill pack SK-H95W-R is available for this kit
  • Ensure that disposal of these used sorbents complies with all local, state and federal regulations 

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.

40 CFR 263.31

Transporters “must clean up any hazardous waste discharge that occurs during transportation.

33CFR 154.1047(c)(2)

Pertaining to navigable waters, a facility that handles, stores or transports Group V petroleum oils must identify response resources such as containment booms, sorbent booms and other methods.


Sorbent type

For recovering unknown, aggressive or hazardous fluids

Recycled Content

Some components feature recycled material

Recycled Content