HideShow Navigation
ST-UXL

Wheeled Tote Universal Spill Kit

Key Facts 138 US Gallons | 522 Liters of oil** 112 US Gallons | 424 Liters of water* Polypropylene and SAF
Description
Application
Facts and figures
Notes

Extra large wheeled tote

This is a U.S. Department of Transportation-approved container that can also double up as a receptacle for the used absorbents. The tough plastic extra large container features a pull-off lid for easy access. Wheels make this kit very maneuverable and the size is designed to go through a standard width doorway. Once used the tote can be refilled with absorbents.

Contents:


150 x Pads

size 15” x 18” (38 cm x 46 cm)

The pads in this spill kit are Universal meltblown sonic bonded polypropylene and will absorb both oil- and water-based fluids at the same time.


56 x Socks

size 3” x 4’ (8 cm x 1.2 m)

These socks feature a spun-bond outer sleeve with a durable heat sealed seam. This tube is then filled with a next generation super absorbent flake core and sealed with a durable metal clip.


16 x Pillows

size 9" x 14" (23 cm x 38 cm)

These pillows feature a spun-bond outer casing and a super absorbent flake core. The core is a next generation absorbent that will absorb and retain both oil-based and water-based fluids.


30 x Waste Bag

These are made from a tough grade of polythene. There is also a cable tie supplied so that the waste can be secured safely.


1 pair of gloves

Waterproof gloves help to ensure safe handling of spilled substance.


1 pair of goggles

All-in one clear goggles provide eye protection from splashes.


1 guide book

An informative booklet that advises on spill recovery.

This spill kit features a combination of absorbents that will contain and recover a 138 Gallon spill of oil and water-based fluids plus the basic equipment needed to handle the clean up process.

Product Code

ST-UXL

Format

Universal, Spill Kit

Absorbency*

138 US Gallons | 522 Liters of oil** 112 US Gallons | 424 Liters of water*

Units/Case

1

LTL/Pallet

1

FTL/Pallet

1

Base Fiber

Polypropylene and SAF

Star Rating

Ensure that disposal of these used sorbents complies with all local, state and federal regulations

29 CFR 1910.120(j)(1)(vii)

...suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.120(j)(1)(vii)

U.S. Department of Transportation specified salvage drums or containers and suitable quantities of proper absorbents shall be kept available and used in areas where spills, leaks or ruptures may occur.

29 CFR 1910.22(a)(2)

The floor of every workroom shall be maintained in a clean and, so far as possible, a dry condition.

40 CFR 263.31

Transporters “must clean up any hazardous waste discharge that occurs during transportation.

33CFR 154.1047(c)(2)

Pertaining to navigable waters, a facility that handles, stores or transports Group V petroleum oils must identify response resources such as containment booms, sorbent booms and other methods.


Sorbent type

Recovers both oil and water based fluids at the same time

Recommended

Recommended for recovering both oil and water indoors

Recommended

We recommend this absorbent for recovering both oil and water outdoors

Recycled Content

Some components contain recycled material

Recycled Content